Preferred_Debian_Packaging.webm

Thank you very much.

Thanks everybody for coming,…

If you are packaging software and you want
me to work on with you,

this is how you can do that.

It is a very self-??? talk:

I just want to explain some of the things
that I like,

some practice that I prefer about Debian
packaging,

and I don't pretend this is any sort of
official,

permanent or final thing.

I just wanted to share some ideas that I
have about the way that I work with

packages, in the hope that maybe, hmm,
for two hopes:

One is that I hope that I can show you
something that you have not heard of,

or maybe you were doing differently,

or maybe you think it is the right think
to do and it is just nice to see somebody

somebody else doing it.

My second hope is that you can tell me
what I am doing wrong,

and you can help me learn and improve
on my own packaging techniques.

If you see something that I am proposing
up here,

and you think there is a problem with it,
I would like to hear about it too.

I just want to see more of the culture
within Debian,

of people who are doing packaging,
explaining what they are doing,

and so I thought I would just step up and
explain:

"Here is some of the practice that I do",

In the hope that other people will do the
same and explain what they are doing,

and maybe they can learn from me and
I can learn from them.

Without much further ????, I am just going
to dive into it.

If you have questions, I am perfectly
happy to be interrupted,

we have some folks with walking mics
in the crowd:

you can just raise your hand.

I you have got a question or an
interruption or whatever,

that is fine.

I ??? I got the whole 15 minutes,
I think there are 20 minutes,

I ??? the whole time, so there will be
also time for questions at the end

if you prefer.

But I do not mind being interrupted.

So, this is all on this web page here,

you could probably skip this talk and go
read the web page,

but then you would not have the nice
??? actions,

and it is easier to tell me that I am
wrong in person,

so I would like to have that happen.

I put this up on the Debian wiki,

because I want anyone to be able to find
it.

If you thing you have got some good ideas,
you should put it on the Debian Wiki too:

other people can take advantage of the
ideas that you have got.

First baseline is: I really like revision
control.

And I know that it makes me a certain
flavor on nerd,

but when we are working with things that
are as complicated as software packages,

hmmm, I think a lot of people don't get
that in Debian we are not just working on

one software package:

you are actually probably, if you are doing
a responsibly work,

on at least two software packages, and
maybe 5.

So you have got the version that is
unstable and you have got

the version that you try to maintain for
stable as well.

And we are committing to doing maintenance
work.

A lot of our work in the project is ???
in nature:

we want to clean up the mess and we want
us to stay out of the way and

to make sure things work, functionally,

for people who are relying on the
operating system to not get in their way.

So revision control I think is really
helpful because it means you can

keep track of what changes you have done
on different branches of the project

while you are maintaining both of them.

Basically, ??? require working with
the revision system I am comfortable with,

I prefer Git, I am not going to have a
religious word about it.

If upstream uses Git, I am even happier,
and I try to make my packaging depend on

upstream's revision control.

I like to use 'git-buildpackage', and I
like to use it with debhelper.

If you have not tried out
'git-buildpackage',

we are going to have a
'git-buildpackage' skill share session

later on today actually, and I welcome
you to come and share your tricks with it,

or learn some tricks from other people.

It is a particular way that you can keep
your Debian packaging in a Git repository,

and it helps you to keep track of all of
the changes that ave happened within

your packaging and within upstream to
make sure you are not accidentally

making other changes.

So it is very easy to go back and review
what you have done.

I find that really useful.

I definitely also like to keep upstream's
source code in the same revision control

system.

I like to keep the tarballs in the
revision control system because it means

that if someone is interested, they can
uses a tool called 'debcheckout'.

You can use 'debcheckout' with a name of
a package:

you say just "I am really interested in
package 'foo',

let me see the source code for that":

debcheckout foo

You get the source code, and you get the
source code from a revision control

system that you can now track and you
can just propose changes on.

You can also extract the tarball from that
revision control system.

'debcheckout' actually works even if you
do not have upstream stuff in there,

but I like to keep it all in one revision
control system,

it is just easier to find everything when
you want.

Some of these things that I prefer have
to do with what the upstream software

developer has done, so I am less inclined
to try the package an upstream software

project if they just throw tarballs here
over the wall to an FTP side

every now and then.

It makes it more difficult for me to know
what they are doing,

and why they are doing it.

So i like it, I have already said, when
upstream uses Git,

I also like when upstream signs their
releases,

and say "hey, this is specific release",

Because that is a signal that I can use,
or somebody else that understands the

project: as said "we think that this
something that other people can use",

or "this is a particular version we would
like other people to test".

There are a lot of other situations where
maybe it is not so important.

And having that be cryptographically
signed is really useful.

I care about cryptographic signature on
software because I want to know that

what I am running is related to the code
that somebody else out should be run.

And if you don't verify your software
cryptographically, anyone could

intercept the network connection
between you and that software,

and modify the software before it gets
to you.

And the cryptographic signature just says:

"look, this is a version that I am OK
with. I am putting it out there and

it comes from me".

And so I can have a trace back to that
point.

??? just talk about briefly about how you
do cryptographic verification of upstream.

You might know upstream: you might know
them personally, you know their key

already, that is fine.

That is not the usual case: we work on
the Internet.

In the situation where your upstream is
signing their tarballs

and you have not met them, you do not
have to sign their key,

you do not have to say "I announce this
is their key".

This is probably the same one that is
signing every release,

so you should keep track of that.

Debian has a nice way to keep track of
that:

you can tell Debian how to find the new
version of the upstream tarball.

This is in the Debian 'watch' file.

If you type 'man uscan', you can learn
more about Debian 'watch',

and Debian 'watch' has now a feature that
lets you say

"that is not only this way you find the
tarball,

but upstream publishes signatures
and the signatures look like this".

You know, they got a '.sig' at the end.

So there is a particular arcane way to
specify that, but if you specify that,

then 'uscan' can find not only the
upstream tarball but can find the

upstream signature and, if you drop
upstream's signing key -

which of course I did not put on the wiki
page, someone should add it that and

fix it - you can put the upstream signing
key in 'debian/upstream/signing-key.asc'.

And then if you do that, when you say
'uscan', you can tell…

Maybe some people here do notk
now how to use 'uscan'.

'uscan' is a very simple tool,
you run it from a software package that

has a 'debian' directory, or even one
level up if you keep all of your software

packages in one folder. You can go one
level up and say 'uscan', and it will look

in all of the folder that are children
of it, and look for new version by

trying to find for new upstreams versions
in 'debian/watch'.

And if you have configured 'debian/watch'
properly, it can find the new upstream

signatures, and if you have got the
'upstream/signing-key.asc', then

it will actually verify the signature for
you as part of fetching the new

upstream tarball.

So you can get all of those things just
by setting ???? that way.

There is a hand up down there, could we
get the mic down to the hand ?

Or to the person who has that hand, it is
not just a hand. [public laugh]

[someone] Publish a tarball and a hash, '.sha1',
and sign that hash, '.sha1.asc'.

Can 'uscan' cope with this and check the
signature on the hash and that the hash

belongs to that tarball ?

[Daniel] I do not believe that 'uscan' can
do that currently. So anybody out there

who wants to make things better for the
world should go hack on 'uscan':

that is a pretty straightforward thing
that we should fix because I agree

that is common pattern.

[someone] I have no answer to this
question by I have another question:

how do you convince upstreams who do
not release tarballs or who do

not set tags in Git ?

[Daniel] Who do not make tags in Git ?

[someone] Yes, if there is no tags you
can not check out a tarball.

Is there any good way to convince
upstream to do this ?

[Daniel] Git has this nice feature, which
is that you can create a tag,

which is associate with a particular
revision,

and you would like to have a tag
everywhere that a tarball has been

released from. I am tempted to pull up
a Git view and show people some tags.

The question that you ask is a social
one, not just a technical one,

and I actually find that my upstreams
are pretty responsive.

Usually I frame my request as "hey, it
looks like you made this tarball from

this particular commit 'id'. If you could
tag you releases, it would be really

helpful to me, and here is the command
that I would use to tag the release".

And I say "git tag…" and of course I
can never remember so first I look it up,

but it is either 'tag name' 'commit id' or
'commit id' 'tag name'.

But I would look it up and I would write
the e-mail so that all they have to do is

they read it, understand my argument,
and execute one command.

And then it starts them ??????

And if you say 'tag -s' then your tag will
be cryptographically signed, which

I think is a really good thing to do too.