How to 3D print human tissue - Taneka Jones

There are currently hundreds of thousands
of people on transplant lists,

waiting for critical organs like kidneys,
hearts, and livers

that could save their lives.

Unfortunately,

there aren’t nearly enough donor organs
available to fill that demand.

What if instead of waiting,

we could create brand-new, customized
organs from scratch?

That’s the idea behind bioprinting,

a branch of regenerative medicine
currently under development.

We’re not able to print complex
organs just yet,

but simpler tissues including blood
vessels and tubes

responsible for nutrient
and waste exchange

are already in our grasp.

Bioprinting is a biological
cousin of 3-D printing,

a technique that deposits layers of
material on top of each other

to construct a three-dimensional object
one slice at a time.

Instead of starting with metal, plastic,
or ceramic,

a 3-D printer for organs and
tissues uses bioink:

a printable material that
contains living cells.

The bulk of many bioinks are water-rich
molecules called hydrogels.

Mixed into those are
millions of living cells

as well as various chemicals that
encourage cells to communicate and grow.

Some bioinks include a
single type of cell,

while others combine several different
kinds to produce more complex structures.

Let’s say you want to print a meniscus,

which is a piece of cartilage in the knee

that keeps the shinbone and thighbone
from grinding against each other.

It’s made up of cells called chondrocytes,

and you’ll need a healthy supply of
them for your bioink.

These cells can come from donors whose
cell lines are replicated in a lab.

Or they might originate from a
patient’s own tissue

to create a personalized meniscus less
likely to be rejected by their body.

There are several printing techniques,

and the most popular is extrusion-based
bioprinting.

In this, bioink gets loaded into a
printing chamber

and pushed through a round nozzle
attached to a printhead.

It emerges from a nozzle that’s rarely
wider than 400 microns in diameter,

and can produce a continuous filament

roughly the thickness
of a human fingernail.

A computerized image or file guides the
placement of the strands,

either onto a flat surface or into a
liquid bath

that’ll help hold the structure in place
until it stabilizes.

These printers are fast, producing the
meniscus in about half an hour,

one thin strand at a time.

After printing, some bioinks
will stiffen immediately;

others need UV light or an additional
chemical or physical process

to stabilize the structure.

If the printing process is successful,

the cells in the synthetic tissue will
begin to behave

the same way cells do in real tissue:

signaling to each other, exchanging
nutrients, and multiplying.

The hydrogel scaffold can be designed
to degrade as the cells proliferate.

That way, if the tissue is implanted into
the body,

the printed structure can fuse
with the surrounding tissue.

We can already print relatively simple
structures like this meniscus.

Bioprinted bladders have also been
successfully implanted,

and printed tissue has promoted facial
nerve regeneration in rats.

Researchers have created lung tissue,
skin, and cartilage,

as well as miniature, semi-functional
versions of kidneys, livers, and hearts.

However, replicating the complex
biochemical environment

of a major organ is a steep challenge.

Extrusion-based bioprinting may destroy

a significant percentage of cells in the
ink if the nozzle is too small,

or if the printing pressure is too high.

One of the most formidable challenges

is how to supply oxygen and nutrients
to all the cells in a full-size organ.

That’s why the greatest successes so far

have been with structures
that are flat or hollow—

and why researchers are busy
developing ways

to incorporate blood vessels
into bioprinted tissue.

There’s tremendous potential to use
bioprinting

to save lives and advance our
understanding

of how our organs function
in the first place.

And the technology opens up a dizzying
array of possibilities,

such as printing tissues with
embedded electronics.

Could we one day engineer organs that
exceed current human capability,

or give ourselves features like
unburnable skin?

How long might we extend human life
by printing and replacing our organs?

And exactly who—and what—

will have access to this technology
and its incredible output?