-
The key innovation of the graphic user interface is that input is performed directly on top of output.
-
Today, we’re going to explore what makes an interface easy, hard, or “natural,”
-
and we’re going to do it by starting with something really simple: a measuring cup.
-
It has a user interface: it’s got label readout here.
-
There’s a task: Fill up a liquid to a desired amount.
-
So, how might you be able to improve this standard measuring cup design here?
-
What kind of things can you think of?
-
OXO is a company that sells kitchen utencils.
-
At the Gel Conference in 2008, OXO’s Alex Lee talked about their measuring cup:
-
The first prototype came unsolicited in the mail;
-
it inspired them to go out into the field and ask people about problems with their measuring cups
-
and suggestions for improvements.
-
They got things like: “It’s sometimes slippery” or “The handle gets hot”.
-
Nobody complained about the measuring part;
-
but, when they watched people measure things, they would do this:
-
Grab some liquid;
-
Pour it in;
-
Hold it up;
-
Pour some more in;
-
Hold it up;
-
Pour a little more;
-
There we go!
-
This stuttered-step measurement seems kind of inelegant,
-
so, to address this, OXO released a design with a clever insight: The numbers are visible from above.
-
This provides continuous interactive feedback on your actions.
-
Pour once; and when you get to the right level, you can see it directly and stop.
-
It’s a great design in lots of ways, but there’s still some room for further improvement.
-
For starters, the numbers that are written are sideways from the reader’s perspective.
-
Not a huge deal, but still, it’s kind of like when you have to tip your head to look at a table.
-
And also — some of you may like this, but I’ve always found this ridge here to be a little inelegant:
-
This feels like a medical device more than something that belongs in the kitchen.
-
And, when I went to the grocery store today, I actually found this measuring cup by Pyrex:
-
It takes the insight from the OXO measuring cup — that you can measure from above —
-
and improves upon it in two ways:
-
The first is that the numbers right here are readable from the reader’s perspective.
-
Hold it in the right hand if you want ounces, or in your left hand if you want millilitres.
-
The second is that, for me at least, this design is a whole lot cleaner and nicer-looking.
-
So, in this humble story of a better measuring cup,
-
Alex Lee at OXO has provided us with four important lessons about human-centred design.
-
There’s a common story that the carmaker Henry Ford once said,
-
“If I asked people what they wanted, they would have said ‘a faster horse.’”
-
[It] turns out that they probably didn’t say that — it’s probably made up — but it makes a good point.
-
Our first lesson is that in both transit and in cookware,
-
simply asking people what they want can often miss important opportunities.
-
The second is that you can find these problems and opportunities — like poor ergonomics —
-
by going out into the field and discovering what people actually do.
-
And, third, you can get extra power out of this observation by bringing prototypes along with you.
-
Fourth, the world is full of people tinkering in their garage,
-
and everyone wins when the stars align to bring those things into the world.
-
With measuring cups, like user interfaces, you can think of there as being two steps:
-
The first is having some action.
-
And the second is evaluating the outcome.
-
At each of these steps, you, as a designer, has an opportunity for success or for failure.
-
In our first step, what you have to cross is the gulf of execution:
-
How does the user know what to do?
-
And the gulf that you have to help the user cross is the gulf of evaluation:
-
How does the user know what happened?
-
My sketch here is based on a diagram that my colleague Bill Verplank often uses.
-
As a designer, here are six powerful questions that you can ask to ascertain what challenges may arise:
-
How usually can someone determine the function of a device, or what actions are possible?
-
And then, how can I determine the mapping from their goals to their physical movements —
-
what they actually do with the user interface?
-
Once they have the plan, how usually can they execute that action?
-
And, after they’ve executed that action, how usually can they tell what state the system is in
-
or whether it’s in a desired state?
-
And, more generally, can they figure out the mapping between the system state
-
and what they should interpret that to mean?
-
And, as a designer, here’s several things that you can do to actually make these easier:
-
The first and simplest is, if there’s functionality that a system can do,
-
the best way to communicate that to the user is to put that on the screen —
-
make it visible in one way or another.
-
And, if it’s in the physical world, give it a handle, or knob, or button.
-
These cues to action are called “affordances”.
-
Second, provide users with clear, continuous feedback, so they know exactly what’s happening.
-
Third, all things equal, be consistent with existing standards, platform conventions, and other idioms.
-
Fourth, whenever you can, make it possible for people to back up, through Undo or some other mechanism:
-
Very few things should be permanent and irreversible.
-
A benefit of having all operations being non-destructive
-
is that it also enables users to explore and try out things;
-
and especially in creative applications,
-
you see that people will try down branches and use Undo to come back.
-
Fifth, provide a systematic way for people to discover all of the functionality available in an application.
-
If you watched somebody use a new website, for example,
-
one thing that you might see them do when they’re trying to figure out how to navigate it,
-
is [to] roll over all the menu bars, to see what every option that’s out there is.
-
And, finally, reliable software is a usability issue:
-
The thing that’s supposed to happen should [happen]; and random stuff that isn’t, shouldn’t.
-
I know that reliability is easier said than done, but it’s still really important;
-
and a lot of the interfaces that people really like have this property of reliability.
-
So, now that we have these new conceptual tools of a gulf of execution and evaluation —
-
of knowing what you can do and whether what you’ve wanted is what happened —
-
let’s take a look at a video that Bill Moggridge and colleagues at IDEO put together
-
about someone trying to buy a soda from a vending machine in Japan
-
using their mobile phone.
-
While you’re watching this video, think about what’s causing the breakdowns,
-
and how you might fix them by using the bullet points that we’ve outlined in this lecture today.
-
We started out today looking at physical products,
-
and we moved on to explore smart products and mobile phones.
-
Now let’s think about what direct manipulation and the gulfs of execution and evalution mean
-
for building software.
-
What’s better? A command line or a graphical user interface?
-
Well, I think the answer is going to have to be “it depends.”
-
Nearly every design is good for something and bad for something else.
-
But let’s try to figure out what makes them different: think about moving a file between two folders.
-
On a graphical user interface, you simply pick it up in one location, and drop it in another:
-
You have continuous feedback about what’s happening.
-
All of the objects that are of interest to you are available onscreen,
-
and you can simply point at what you want — “input on output”.
-
With a command line, you have to know, a priori, what the name of the command that is that you’d like to use.
-
You also have to remember the syntax for using that move command
-
there’s minimal feedback about whether the operators that you’re dealing with —
-
like files or folders — are actually available,
-
and there’s not much in confirmation that you’ve moved it ultimately to the right place —
-
it can be easy to make errors.
-
What we see with the graphical interface is the power of direct manipulation —
-
immediate feedback on all actions, continuous representations of the objects,
-
and they leverage metaphors that we have from the physical world.
-
These metaphors are especially important when you’re learning a new interface,
-
and so when the graphical interface was first released,
-
being able to rely on what people knew about desks, folders, and files was really helpful;
-
those become less valuable once you’ve become accustomed to the computer world.
-
So, give some thought to which of these principles hold
-
for both the command-line interface and the graphical interface.
-
From my perspective,
-
the graphical interface does a much better job in terms of visibility, feedback, and consistency.
-
In either interface style, Undo is possible,
-
although the GUI generally does a better job of exposing when Undo is available
-
and what undoing will actually do.
-
One place that a graphical interface really shines is in terms of discoverability —
-
you can leaf through every single menu in a system, and see all of the operations that are there;
-
with a command-line interface,
-
there’s really no way to know what’s the full set of operations that you could possible type into a terminal.
-
There’s no mater list.
-
In terms of reliability, either interface style can be made to be reliable.
-
“But how can this be?” some of you may be saying,
-
“The command-line interface can be so much better sometimes!”
-
And it is!
-
When is that?
-
The command-line interface works better
-
when the indirection that it offers is a benefit rather than a drawback.
-
And in fact that indirection that it offers is a kind of abstraction,
-
and that’s what gives programming its power,
-
and so the command-line interface, like programming — because in some way it kind of is programming —
-
gets its power when you can express stuff more abstractly and thereby do work more efficiently.
-
So, for example, moving all of the files that match a certain set of criteria from one place to another,
-
that can sometimes be more efficiently accomplished with a command line.
-
And even that wonderful discoverability of the graphical user interface has a dark side:
-
This is a picture from my colleague Takeo Igarashi.
-
Takeo made this picture by turning on all of the menu bars in a certain version of Microsoft [PowerPoint].
-
And you can see that, on his laptop screen, all of those menu bars crowded things out so much
-
that there was almost no screen left over for the slides.
-
So, is this interface discoverable? Absolutely! All of the functionality is right there.
-
But you pay a cost in terms of screen real estate.
-
In this introductory course, we won’t have a chance to talk much about gestural interfaces.
-
But, given their recent popularity, and tablet interfaces, game controllers,
-
and movies like « the Minority Report », I want to conclude today’s lecture with an eye to the future:
-
Gestural interfaces offer a wonderful solution to menu creep,
-
in that they don’t take up any permanent screen real estate.
-
The downside, of course, is that they are non–self-disclosing —
-
you don’t know what functionality might be available.
-
And, at their best, gestural interfaces can be even more direct than their graphical user interface counterpart.
-
In recent years, I’ve watched in amazement at people of all ages and from all backgrounds
-
have figured out how to use tablet computers really effectively.
-
And the directness, I think, is one big reason for that.
-
Learning to use a mouse is actually kind of a big deal:
-
Once you’ve got the hang of it you forget that,
-
but there is this indirectness that you’ll have to learn
-
that what you’re doing over here matters over here.
-
With a tablet, the thing that you touch is the thing that you’re interacting with.
-
And the best gestures in these interfaces, like pinching to zoom, just feels so natural —
-
the metaphor is very clear, the feedback is immediate, the outcome is predictable.
-
In other cases, when the mapping is more arbitrary or harder to guess,
-
I think these interfaces are less effective.
-
For example, if I swipe with four fingers, that will bring up a menu bar on an iPad.
-
How on earth would I ever figure that out?
-
So, in gestural interfaces, like in all others, things work best when the feedback is clear,
-
and the interface provides cues through metaphors or visual signals
-
that help you know what you can do within the user interface.
-
To learn more about direct manipulation interfaces and the psychology of design,
-
I strongly recommend Don Norman’s book « The Design of Everyday Things ».
-
We’ll see you next time.