0:00:00.408,0:00:01.728
The planetary gear set,

0:00:01.728,0:00:02.718
also known as,

0:00:02.718,0:00:04.256
the epicyclic gear train

0:00:04.256,0:00:05.350
is one of the most

0:00:05.350,0:00:06.410
important and interesting

0:00:06.410,0:00:07.950
inventions in engineering.

0:00:08.510,0:00:09.490
They are great speed [br]

0:00:09.490,0:00:10.811
variation mechanisms

0:00:10.811,0:00:11.782
and are often used in

0:00:11.782,0:00:13.813
automobiles as a vital part of

0:00:13.813,0:00:15.233
automatic transmissions.

0:00:18.585,0:00:19.967
Let's explore the secrets

0:00:19.967,0:00:21.254
of the planetary gear set

0:00:21.254,0:00:22.714
in this video.

0:00:24.694,0:00:26.039
A planetary gear set

0:00:26.039,0:00:27.639
has four main parts:

0:00:28.299,0:00:29.868
the sun,

0:00:30.597,0:00:32.087
planet gears,

0:00:33.034,0:00:34.370
ring gear,

0:00:35.747,0:00:36.790
and carrier.

0:00:37.415,0:00:38.458
You can see

0:00:38.458,0:00:41.188
that it sometimes rotates quickly,

0:00:41.868,0:00:43.262
sometimes slowly,

0:00:46.213,0:00:47.283
and sometimes

0:00:47.283,0:00:48.873
even in reverse.

0:00:50.203,0:00:52.564
But, how does this happen?

0:00:52.564,0:00:53.474
You will be able

0:00:53.474,0:00:54.464
to predict the motion[br]

0:00:54.464,0:00:55.726
of this gear set completely,

0:00:55.726,0:00:56.746
if you understand

0:00:56.746,0:00:59.523
one simple fact!

0:00:59.523,0:01:01.732
When two gears are moving as shown

0:01:01.732,0:01:04.765
they should have the same[br]speed at the interface.

0:01:05.223,0:01:07.585
This means that the speed of gear A

0:01:07.585,0:01:10.603
should be the same as gear B[br]at their mating point.

0:01:17.589,0:01:19.612
The speed has to be the same

0:01:19.612,0:01:23.270
otherwise the gear teeth[br]will penetrate each other as shown

0:01:23.270,0:01:25.806
that is an impossible condition.

0:01:27.118,0:01:29.630
Just apply this fact to [br]planetary gear sets,

0:01:29.630,0:01:33.574
and you will be able to predict how[br]speed variation is achieved.

0:01:36.174,0:01:40.174
Assume that the ring gear is held[br]stationary and we rotate the sun gear.

0:01:44.130,0:01:46.742
Think of what happens to the planet gears:

0:01:48.438,0:01:51.746
At point A the planet gear should[br]have a certain speed

0:01:51.746,0:01:56.560
and at point B the speed should be [br]zero as the ring gear is stationary.

0:01:57.163,0:02:01.163
However, how are both of these conditions[br]possible at the same time?

0:02:01.961,0:02:07.161
There is only one way the planet gear should spin as well as turn

0:02:07.766,0:02:13.595
The spinning will produce velocities in opposite [directions] at the top and bottom points as shown

0:02:13.943,0:02:17.695
Whereas the turning Produces unidirectional velocities

0:02:19.073,0:02:26.143
at the top the spinning and turning velocities are in opposite directions, so the velocity [of] point B is zero.

0:02:26.822,0:02:29.230
at The bottom they get added up

0:02:30.083,0:02:36.382
in short the Planet gears are forced to turn in order to satisfy the condition of velocity.

0:02:36.541,0:02:41.806
as The carrier is attached to the planet gear it will turn along with the planet Gears

0:02:42.816,0:02:48.373
Now let's see what happens when the sun gear is held stationary and the ring gear is rotated

0:02:50.397,0:02:55.636
This is the exact opposite to the previous case at the inner point of the planet gear

0:02:55.636,0:03:01.044
the Velocity should be zero and the outer points should have the speed of the ring gear.

0:03:01.044,0:03:06.696
in This case the planetary Spin will reverse in order to satisfy the speed conditions

0:03:08.995,0:03:11.735
However this case has one more difference

0:03:12.288,0:03:17.546
The speed of point B. Will be higher than [the] speed of point A in the previous case

0:03:18.214,0:03:21.771
This is obvious as the ring gear radius is higher

0:03:26.156,0:03:33.763
This will make the planet gear spin and turn at a higher speed thus the carrier will turn at a higher speed

0:03:36.570,0:03:40.366
Let's now explore this reverse mechanism of Planet Gears

0:03:42.580,0:03:46.690
For this what you have to do is just arrest the motion of the carrier

0:03:47.997,0:03:53.146
This means the Planet gears are not allowed to turn and can only spin

0:03:55.019,0:03:58.441
This Spin will be opposite to the rotation of the sun gear

0:03:59.633,0:04:04.282
This spinning Planet Gear will make the ring gear rotate in the same Direction

0:04:04.621,0:04:12.017
In short the direction of rotation of the ring Gear will be the opposite to the sun gear thus we will get the reverse gear

0:04:15.373,0:04:22.628
Here you can note that in order to achieve different speeds the input must be given to different parts of the planetary gearset

0:04:22.628,0:04:25.699
This is practically difficult in an actual mechanism

0:04:26.527,0:04:29.080
in an automatic transmission [to] achieve this

0:04:29.080,0:04:35.209
Three planetary gear sets are connected in series as shown with coaxial Shafts

0:04:35.700,0:04:41.818
To understand how this arrangement effectively transfers the input rotation to different parts of the planetary gearset

0:04:41.818,0:04:44.663
Watch our video on automatic transmission

0:04:45.608,0:04:49.608
Your support on patreon.com is greatly appreciated to make our educational service sustainable. Thank you