WEBVTT

00:00:00.408 --> 00:00:01.728
The planetary gear set,

00:00:01.728 --> 00:00:02.718
also known as,

00:00:02.718 --> 00:00:04.256
the epicyclic gear train

00:00:04.256 --> 00:00:05.350
is one of the most

00:00:05.350 --> 00:00:06.410
important and interesting

00:00:06.410 --> 00:00:07.950
inventions in engineering.

00:00:08.510 --> 00:00:09.490
They are great speed 


00:00:09.490 --> 00:00:10.811
variation mechanisms

00:00:10.811 --> 00:00:11.782
and are often used in

00:00:11.782 --> 00:00:13.813
automobiles as a vital part of

00:00:13.813 --> 00:00:15.233
automatic transmissions.

00:00:18.585 --> 00:00:20.167
Let's explore the secrets

00:00:20.167 --> 00:00:23.407
of the planetary gear set in this video.

00:00:25.144 --> 00:00:27.647
A planetary gear set has four main parts:

00:00:29.039 --> 00:00:29.868
the sun,

00:00:30.927 --> 00:00:32.087
planet gears,

00:00:33.244 --> 00:00:34.370
ring gear,

00:00:35.897 --> 00:00:36.940
and carrier.

00:00:37.815 --> 00:00:40.441
You can see that it sometimes rotates quickly,

00:00:42.068 --> 00:00:43.262
sometimes slowly,

00:00:46.503 --> 00:00:49.014
and sometimes even in reverse.

00:00:50.483 --> 00:00:52.394
But how does this happen?

00:00:52.924 --> 00:00:55.746
You will be able to predict the motion
of this gear set completely

00:00:55.746 --> 00:00:58.122
if you understand one simple fact.

00:00:59.523 --> 00:01:01.732
When two gears are moving as shown

00:01:01.732 --> 00:01:04.765
they should have the same
speed at the interface.

00:01:05.223 --> 00:01:07.585
This means that the speed of gear A

00:01:07.585 --> 00:01:10.603
should be the same as gear B
at their mating point.

00:01:17.589 --> 00:01:19.612
The speed has to be the same

00:01:19.612 --> 00:01:23.270
otherwise the gear teeth
will penetrate each other as shown

00:01:23.270 --> 00:01:25.806
that is an impossible condition.

00:01:27.118 --> 00:01:29.630
Just apply this fact to 
planetary gear sets,

00:01:29.630 --> 00:01:33.574
and you will be able to predict how
speed variation is achieved.

00:01:36.174 --> 00:01:40.174
Assume that the ring gear is held
stationary and we rotate the sun gear.

00:01:44.130 --> 00:01:46.742
Think of what happens to the planet gears:

00:01:48.438 --> 00:01:51.746
At point A the planet gear should
have a certain speed

00:01:51.746 --> 00:01:56.560
and at point B the speed should be 
zero as the ring gear is stationary.

00:01:57.163 --> 00:02:01.163
However, how are both of these conditions
possible at the same time?

00:02:01.961 --> 00:02:07.161
There is only one way the planet gear should spin as well as turn

00:02:07.766 --> 00:02:13.595
The spinning will produce velocities in opposite [directions] at the top and bottom points as shown

00:02:13.943 --> 00:02:17.695
Whereas the turning Produces unidirectional velocities

00:02:19.073 --> 00:02:26.143
at the top the spinning and turning velocities are in opposite directions, so the velocity [of] point B is zero.

00:02:26.822 --> 00:02:29.230
at The bottom they get added up

00:02:30.083 --> 00:02:36.382
in short the Planet gears are forced to turn in order to satisfy the condition of velocity.

00:02:36.541 --> 00:02:41.806
as The carrier is attached to the planet gear it will turn along with the planet Gears

00:02:42.816 --> 00:02:48.373
Now let's see what happens when the sun gear is held stationary and the ring gear is rotated

00:02:50.397 --> 00:02:55.636
This is the exact opposite to the previous case at the inner point of the planet gear

00:02:55.636 --> 00:03:01.044
the Velocity should be zero and the outer points should have the speed of the ring gear.

00:03:01.044 --> 00:03:06.696
in This case the planetary Spin will reverse in order to satisfy the speed conditions

00:03:08.995 --> 00:03:11.735
However this case has one more difference

00:03:12.288 --> 00:03:17.546
The speed of point B. Will be higher than [the] speed of point A in the previous case

00:03:18.214 --> 00:03:21.771
This is obvious as the ring gear radius is higher

00:03:26.156 --> 00:03:33.763
This will make the planet gear spin and turn at a higher speed thus the carrier will turn at a higher speed

00:03:36.570 --> 00:03:40.366
Let's now explore this reverse mechanism of Planet Gears

00:03:42.580 --> 00:03:46.690
For this what you have to do is just arrest the motion of the carrier

00:03:47.997 --> 00:03:53.146
This means the Planet gears are not allowed to turn and can only spin

00:03:55.019 --> 00:03:58.441
This Spin will be opposite to the rotation of the sun gear

00:03:59.633 --> 00:04:04.282
This spinning Planet Gear will make the ring gear rotate in the same Direction

00:04:04.621 --> 00:04:12.017
In short the direction of rotation of the ring Gear will be the opposite to the sun gear thus we will get the reverse gear

00:04:15.373 --> 00:04:22.628
Here you can note that in order to achieve different speeds the input must be given to different parts of the planetary gearset

00:04:22.628 --> 00:04:25.699
This is practically difficult in an actual mechanism

00:04:26.527 --> 00:04:29.080
in an automatic transmission [to] achieve this

00:04:29.080 --> 00:04:35.209
Three planetary gear sets are connected in series as shown with coaxial Shafts

00:04:35.700 --> 00:04:41.818
To understand how this arrangement effectively transfers the input rotation to different parts of the planetary gearset

00:04:41.818 --> 00:04:44.663
Watch our video on automatic transmission

00:04:45.608 --> 00:04:49.608
Your support on patreon.com is greatly appreciated to make our educational service sustainable. Thank you