[Script Info]
Title: 
[Events]
Format: Layer, Start, End, Style, Name, MarginL, MarginR, MarginV, Effect, Text
Dialogue: 0,0:00:00.00,0:00:02.79,Default,,0000,0000,0000,,How to bend acrylic pipe perfectly.
Dialogue: 0,0:00:02.79,0:00:03.91,Default,,0000,0000,0000,,Step 1:
Dialogue: 0,0:00:03.91,0:00:06.41,Default,,0000,0000,0000,,Measure the inner diameter of your pipe.
Dialogue: 0,0:00:06.41,0:00:10.27,Default,,0000,0000,0000,,Mine is 18 millimeter and outside is 22 millimeter.
Dialogue: 0,0:00:10.27,0:00:14.63,Default,,0000,0000,0000,,Step 2:\NGet a silicon rod that fits on the inside of your pipe.
Dialogue: 0,0:00:14.63,0:00:19.68,Default,,0000,0000,0000,,Mine is a medical silicone rod and it's exactly 18 mm.
Dialogue: 0,0:00:19.68,0:00:23.13,Default,,0000,0000,0000,,Step 3:\NCut your silicon rod to length and then
Dialogue: 0,0:00:23.13,0:00:25.21,Default,,0000,0000,0000,,cut a taper at one side.
Dialogue: 0,0:00:25.21,0:00:27.77,Default,,0000,0000,0000,,Drill a hole through the tapered side.
Dialogue: 0,0:00:27.77,0:00:29.03,Default,,0000,0000,0000,,[drilling noise]
Dialogue: 0,0:00:29.18,0:00:30.33,Default,,0000,0000,0000,,Step 4:
Dialogue: 0,0:00:30.33,0:00:35.66,Default,,0000,0000,0000,,Use a really strong string and thread it through \Nthat hole you just drilled in the silicon rod.
Dialogue: 0,0:00:35.66,0:00:42.34,Default,,0000,0000,0000,,I have noticed that bending a thin metal wire and \Nusing that as a kind of a needle really helps with this.
Dialogue: 0,0:00:42.34,0:00:43.14,Default,,0000,0000,0000,,Step 5:
Dialogue: 0,0:00:43.14,0:00:46.46,Default,,0000,0000,0000,,Here I'm putting some corn flour starch on \Nthe silicon rod to make it slide easier.
Dialogue: 0,0:00:46.46,0:00:50.30,Default,,0000,0000,0000,,You can also try washing-up liquid or soapy water.
Dialogue: 0,0:00:50.30,0:00:52.31,Default,,0000,0000,0000,,And that's all the preparation done.
Dialogue: 0,0:00:52.31,0:00:56.35,Default,,0000,0000,0000,,so we can finally thread our silicon rod \Nthrough the acrylic pipe.
Dialogue: 0,0:00:56.35,0:00:58.79,Default,,0000,0000,0000,,Put on some gloves and start up your heat gun.
Dialogue: 0,0:00:58.79,0:01:00.86,Default,,0000,0000,0000,,[heat gun starts]
Dialogue: 0,0:01:00.86,0:01:03.66,Default,,0000,0000,0000,,Step 6:\NBending the acrylic pipe.
Dialogue: 0,0:01:03.66,0:01:07.26,Default,,0000,0000,0000,,Try to heat up the acrylic pipe as evenly as you can.
Dialogue: 0,0:01:07.26,0:01:09.98,Default,,0000,0000,0000,,You can adjust the temperature by \Nmoving the silicon rod
Dialogue: 0,0:01:09.98,0:01:12.34,Default,,0000,0000,0000,,closer or further away from the heat gun.
Dialogue: 0,0:01:12.34,0:01:16.59,Default,,0000,0000,0000,,And in my experience the further away\Nyou are and the more patience you spend and
Dialogue: 0,0:01:16.59,0:01:20.24,Default,,0000,0000,0000,,the slower you do this step\Nthe better the result.
Dialogue: 0,0:01:20.24,0:01:24.36,Default,,0000,0000,0000,,Once you feel the acrylic softening up,\Nyou can do your bend.
Dialogue: 0,0:01:24.36,0:01:28.87,Default,,0000,0000,0000,,I like to try to stay in the heat of the heat gun\Nbut a little bit further away.
Dialogue: 0,0:01:28.87,0:01:33.04,Default,,0000,0000,0000,,Constantly keeping the acrylic warm\Nwhile I'm doing the bend,
Dialogue: 0,0:01:33.04,0:01:37.22,Default,,0000,0000,0000,,and then removing the acrylic from the heat gun\Nwhen I'm happy with the shape.
Dialogue: 0,0:01:37.22,0:01:38.22,Default,,0000,0000,0000,,[poink]
Dialogue: 0,0:01:38.70,0:01:41.04,Default,,0000,0000,0000,,[water swishing sound]
Dialogue: 0,0:01:43.24,0:01:46.58,Default,,0000,0000,0000,,So this was my first try and it's not perfect.
Dialogue: 0,0:01:46.58,0:01:49.76,Default,,0000,0000,0000,,You can see here I let the heat go\Na little bit too far.
Dialogue: 0,0:01:49.76,0:01:53.56,Default,,0000,0000,0000,,So we have these ugly bubbles\Nand the whole pipe is a little cloudy.
Dialogue: 0,0:01:53.56,0:01:56.90,Default,,0000,0000,0000,,I think it was because\Nmy gloves were really oily.
Dialogue: 0,0:01:56.90,0:01:58.83,Default,,0000,0000,0000,,So it was a stupid choice of gloves.
Dialogue: 0,0:01:58.83,0:02:02.34,Default,,0000,0000,0000,,The corn flour starch\Nnormally doesn't cloud my pipes
Dialogue: 0,0:02:02.34,0:02:07.20,Default,,0000,0000,0000,,But for the second try I wanted to use \Nwashing-up liquid and clean gloves instead.
Dialogue: 0,0:02:07.20,0:02:08.41,Default,,0000,0000,0000,,Let's see how that went.
Dialogue: 0,0:02:08.41,0:02:12.24,Default,,0000,0000,0000,,For the second try, I went with a really tight radius.
Dialogue: 0,0:02:12.24,0:02:18.38,Default,,0000,0000,0000,,And as you can see here, I think I got greedy\Nand went with a little bit too tight radius.
Dialogue: 0,0:02:18.38,0:02:21.36,Default,,0000,0000,0000,,The pipe looks clear though.\NNo more cloudiness.
Dialogue: 0,0:02:21.36,0:02:26.93,Default,,0000,0000,0000,,And, I would recommend you to order more material\Nthan what you need for your project, because
Dialogue: 0,0:02:26.93,0:02:29.03,Default,,0000,0000,0000,,you will have some failed pipe.
Dialogue: 0,0:02:29.03,0:02:31.42,Default,,0000,0000,0000,,Practice makes perfect as always.
Dialogue: 0,0:02:31.42,0:02:33.83,Default,,0000,0000,0000,,Okay!\NThird time's the charm.
Dialogue: 0,0:02:38.12,0:02:38.87,Default,,0000,0000,0000,,[pop]
Dialogue: 0,0:02:38.87,0:02:40.47,Default,,0000,0000,0000,,(silicon rod falls to the ground)
Dialogue: 0,0:02:48.55,0:02:50.54,Default,,0000,0000,0000,,(marble rolls on the floor)
Dialogue: 0,0:02:50.54,0:02:51.83,Default,,0000,0000,0000,,[clang]
Dialogue: 0,0:02:51.83,0:02:57.52,Default,,0000,0000,0000,,Whoever said that perfection does not exist\Nand that it's a fool's errand to pursue it...
Dialogue: 0,0:02:57.52,0:03:01.90,Default,,0000,0000,0000,,did not look at my thumbnail picture in 4K resolution.\N[chuckles]
Dialogue: 0,0:03:01.90,0:03:04.96,Default,,0000,0000,0000,,Anyway, I hope you enjoyed this tutorial.
Dialogue: 0,0:03:04.96,0:03:09.30,Default,,0000,0000,0000,,It's a true pleasure to bend acrylic pipes\Nand now you have to make up a project.
Dialogue: 0,0:03:09.30,0:03:11.62,Default,,0000,0000,0000,,just to be able to experience it.
Dialogue: 0,0:03:11.62,0:03:17.40,Default,,0000,0000,0000,,The reason why I'm bending so much acrylic pipe\Nright now is because of the Marble Machine X.
Dialogue: 0,0:03:17.40,0:03:18.54,Default,,0000,0000,0000,,♪
Dialogue: 0,0:03:18.54,0:03:22.34,Default,,0000,0000,0000,,Here I'm using bent acrylic pipe\Nfor marble transportation,
Dialogue: 0,0:03:22.34,0:03:25.75,Default,,0000,0000,0000,,connecting the demagnetizer\Nwith the marble conveyor belt.
Dialogue: 0,0:03:25.75,0:03:29.83,Default,,0000,0000,0000,,And higher up on the machine I have connected\Nthe outlet from the conveyor belt and
Dialogue: 0,0:03:29.83,0:03:32.38,Default,,0000,0000,0000,,the fish star with the marble divider.
Dialogue: 0,0:03:32.38,0:03:36.81,Default,,0000,0000,0000,,And also, the marble divider itself\Nis made from bent PMMA pipe.
Dialogue: 0,0:03:38.27,0:03:42.51,Default,,0000,0000,0000,,[♪ unreleased/The Marble Conveyor ♪]
Dialogue: 0,0:03:43.87,0:03:50.66,Default,,0000,0000,0000,,I have just started to work on the most difficult acrylic pipe\Nbending project of the whole Marble Machine X build.
Dialogue: 0,0:03:50.66,0:03:56.28,Default,,0000,0000,0000,,I need to connect the marble spreader that\NI built in plywood with these metal rails.
Dialogue: 0,0:03:56.28,0:03:59.26,Default,,0000,0000,0000,,And all the pipes want\Nto collide with each other.
Dialogue: 0,0:03:59.26,0:04:02.66,Default,,0000,0000,0000,,I need to find perfect routing\Nfor this to work.
Dialogue: 0,0:04:02.63,0:04:06.37,Default,,0000,0000,0000,,Here I'm working on channel 22 which is\Nthe last channel of the vibraphone.
Dialogue: 0,0:04:06.37,0:04:08.80,Default,,0000,0000,0000,,And there's a total of 38 channels.
Dialogue: 0,0:04:08.80,0:04:12.02,Default,,0000,0000,0000,,So I need to make 38 individual pipes.
Dialogue: 0,0:04:12.02,0:04:15.57,Default,,0000,0000,0000,,And I'm using a TIG filler rod\Nto create a bend template,
Dialogue: 0,0:04:15.57,0:04:19.40,Default,,0000,0000,0000,,[whoosh] to get a feel for\Nwhat kind of geometry I need a pipe to be.
Dialogue: 0,0:04:19.40,0:04:23.88,Default,,0000,0000,0000,,Then I can use this bend template\Nto create a general shape for the pipe.
Dialogue: 0,0:04:23.88,0:04:26.58,Default,,0000,0000,0000,,O! O! Oh! Hold on!\NWhat's this beauty!
Dialogue: 0,0:04:26.58,0:04:28.06,Default,,0000,0000,0000,,[angelic sound]
Dialogue: 0,0:04:28.06,0:04:32.86,Default,,0000,0000,0000,,If you remembered,\NI found this stud-welding CNC machine,
Dialogue: 0,0:04:32.86,0:04:36.19,Default,,0000,0000,0000,,eh, that I thought was amazing\Nand I reached out to them and
Dialogue: 0,0:04:36.19,0:04:37.97,Default,,0000,0000,0000,,asked if they wanted to collaborate.
Dialogue: 0,0:04:37.97,0:04:39.93,Default,,0000,0000,0000,,And then something truly beautiful happen
Dialogue: 0,0:04:39.93,0:04:45.55,Default,,0000,0000,0000,,Because you the viewer, started to \Nleave comments to HBS explaining why they should
Dialogue: 0,0:04:45.55,0:04:48.17,Default,,0000,0000,0000,,collab with me on the Marble Machine X.
Dialogue: 0,0:04:48.17,0:04:52.97,Default,,0000,0000,0000,,My favorite was that they should lift up\Nan artist from the sunken cost vortex.
Dialogue: 0,0:04:52.97,0:04:53.69,Default,,0000,0000,0000,,[chuckles]
Dialogue: 0,0:04:53.69,0:04:54.41,Default,,0000,0000,0000,,[angelic sound]
Dialogue: 0,0:04:54.41,0:04:58.71,Default,,0000,0000,0000,,I went back to send an email to HBS\Nand when I opened my email,
Dialogue: 0,0:04:58.71,0:05:01.59,Default,,0000,0000,0000,,I found an email from HBS.
Dialogue: 0,0:05:01.59,0:05:04.23,Default,,0000,0000,0000,,That's thanks to all your comments.
Dialogue: 0,0:05:04.23,0:05:07.07,Default,,0000,0000,0000,,Thank you so much for sticking up\Nfor the Marble Machine X and
Dialogue: 0,0:05:07.07,0:05:10.25,Default,,0000,0000,0000,,thanks to HBS for being positive\Ntowards the project.
Dialogue: 0,0:05:10.25,0:05:14.31,Default,,0000,0000,0000,,I send some requirements and they sent me\Nthis test piece.
Dialogue: 0,0:05:14.31,0:05:18.43,Default,,0000,0000,0000,,And I just want to show you\Nhow extremely precise this is.
Dialogue: 0,0:05:18.43,0:05:22.41,Default,,0000,0000,0000,,Here I'm using a micrometer\Nwhich is measuring in millimeter.
Dialogue: 0,0:05:22.41,0:05:25.69,Default,,0000,0000,0000,,When you hear the first click\Nof the clutch of the micrometer, [{\i1}click{\i0}]
Dialogue: 0,0:05:25.69,0:05:28.47,Default,,0000,0000,0000,,That's when you should read your value
Dialogue: 0,0:05:28.47,0:05:29.47,Default,,0000,0000,0000,,[click]
Dialogue: 0,0:05:29.47,0:05:31.56,Default,,0000,0000,0000,,18-0-0-2 (18.002)
Dialogue: 0,0:05:31.56,0:05:33.75,Default,,0000,0000,0000,,I'm actually measuring quite crooked.
Dialogue: 0,0:05:33.75,0:05:38.52,Default,,0000,0000,0000,,So if I had the place to measure more straight\Nwe would get even better result.
Dialogue: 0,0:05:38.64,0:05:39.64,Default,,0000,0000,0000,,[click]
Dialogue: 0,0:05:39.64,0:05:42.30,Default,,0000,0000,0000,,19.015
Dialogue: 0,0:05:42.30,0:05:48.02,Default,,0000,0000,0000,,This machine is down to \Nthousands of a millimeter in precision.
Dialogue: 0,0:05:48.02,0:05:49.74,Default,,0000,0000,0000,,It's just so promising.
Dialogue: 0,0:05:49.74,0:05:50.74,Default,,0000,0000,0000,,[click]
Dialogue: 0,0:05:50.74,0:05:53.52,Default,,0000,0000,0000,,20.008
Dialogue: 0,0:05:53.52,0:05:55.21,Default,,0000,0000,0000,,[laughs]
Dialogue: 0,0:05:55.64,0:05:56.99,Default,,0000,0000,0000,,(imitates evil laugh)
Dialogue: 0,0:05:56.99,0:05:58.92,Default,,0000,0000,0000,,Shout out to HBS.
Dialogue: 0,0:05:58.92,0:06:00.07,Default,,0000,0000,0000,,We're looking at...
Dialogue: 0,0:06:00.07,0:06:04.34,Default,,0000,0000,0000,,using my manual programming pin system\Nthat I already built
Dialogue: 0,0:06:04.34,0:06:07.24,Default,,0000,0000,0000,,for me when I'm composing music for \Nthe Marble Machine X,
Dialogue: 0,0:06:07.24,0:06:12.62,Default,,0000,0000,0000,,and then using this more sturdy,\Nreliable, pre-programmed and precise
Dialogue: 0,0:06:12.62,0:06:17.63,Default,,0000,0000,0000,,stud-welding programming pin system\Nfrom HBS for the world tour.
Dialogue: 0,0:06:17.63,0:06:20.19,Default,,0000,0000,0000,,So we can have the best out of\Ntwo worlds there.
Dialogue: 0,0:06:20.19,0:06:22.98,Default,,0000,0000,0000,,I'm completely side-tracked\Nin this video now.
Dialogue: 0,0:06:22.98,0:06:25.24,Default,,0000,0000,0000,,I'm just so happy about this prospect.
Dialogue: 0,0:06:25.24,0:06:29.06,Default,,0000,0000,0000,,Let's go back to some\NPMMA pipe bending. Shall we?
Dialogue: 0,0:06:29.06,0:06:30.06,Default,,0000,0000,0000,,Ah! Le!
Dialogue: 0,0:06:30.06,0:06:35.14,Default,,0000,0000,0000,,I'm using the template [poink] \Nand creating the general shape
Dialogue: 0,0:06:35.14,0:06:39.23,Default,,0000,0000,0000,,and here I'm making a little mark,\Nso I can cut it to length.
Dialogue: 0,0:06:39.23,0:06:44.58,Default,,0000,0000,0000,,And then I can open the marble spreader\Nand see if the pipe fits.
Dialogue: 0,0:06:44.58,0:06:50.35,Default,,0000,0000,0000,,And this first pipe actually fits perfectly.\NYou can see the marble is coming out there.
Dialogue: 0,0:06:51.24,0:06:52.24,Default,,0000,0000,0000,,♪
Dialogue: 0,0:06:54.06,0:06:55.89,Default,,0000,0000,0000,,The first pipe is easiest.
Dialogue: 0,0:06:55.89,0:06:59.47,Default,,0000,0000,0000,,The consecutive pipes are going to be\Nmuch more difficult because
Dialogue: 0,0:06:59.47,0:07:02.36,Default,,0000,0000,0000,,they have the problem of\Ncolliding with each other.
Dialogue: 0,0:07:02.36,0:07:09.22,Default,,0000,0000,0000,,This is the moment where I realized\NI made 3 pipes and I have 35 pipes to go.
Dialogue: 0,0:07:09.22,0:07:10.39,Default,,0000,0000,0000,,[chuckles]
Dialogue: 0,0:07:10.39,0:07:11.24,Default,,0000,0000,0000,,Phew!
Dialogue: 0,0:07:12.10,0:07:14.41,Default,,0000,0000,0000,,[applause]
Dialogue: 0,0:07:15.26,0:07:19.51,Default,,0000,0000,0000,,[♪ unreleased/The Marble Conveyor ♪]
Dialogue: 0,0:07:27.27,0:07:31.11,Default,,0000,0000,0000,,In situations like this where I need to do\Nreally repetitive work,
Dialogue: 0,0:07:31.11,0:07:36.05,Default,,0000,0000,0000,,which happens a lot on a Marble Machine X\Ndue to its 38 channels,
Dialogue: 0,0:07:36.05,0:07:41.47,Default,,0000,0000,0000,,I keep myself going by repeating\Nan inner mantra.
Dialogue: 0,0:07:41.47,0:07:42.67,Default,,0000,0000,0000,,It goes like this:
Dialogue: 0,0:07:42.67,0:07:47.11,Default,,0000,0000,0000,,It goes like this: "world tour world tour world tour"\N[chuckles]
Dialogue: 0,0:07:47.11,0:07:52.94,Default,,0000,0000,0000,,But seriously I totally underestimated how\Ntime-consuming it was to make these pipes.
Dialogue: 0,0:07:52.94,0:07:58.76,Default,,0000,0000,0000,,So, over eight hours later I had\Nmanaged to do 11 out of 38 pipes,
Dialogue: 0,0:07:58.76,0:08:00.57,Default,,0000,0000,0000,,and I had to call it a day.
Dialogue: 0,0:08:00.57,0:08:04.43,Default,,0000,0000,0000,,I will return to finish this task as soon as possible,
Dialogue: 0,0:08:04.43,0:08:07.59,Default,,0000,0000,0000,,but for now, I could just check the pipes I have made,
Dialogue: 0,0:08:07.59,0:08:09.26,Default,,0000,0000,0000,,and they seem to work well.
Dialogue: 0,0:08:09.26,0:08:10.26,Default,,0000,0000,0000,,[marbles clattering]
Dialogue: 0,0:08:10.26,0:08:11.83,Default,,0000,0000,0000,,[marbles clatteringon the floor]
Dialogue: 0,0:08:13.02,0:08:17.97,Default,,0000,0000,0000,,[♪ unreleased/The Marble Conveyor ♪]
Dialogue: 0,0:08:39.88,0:08:43.41,Default,,0000,0000,0000,,[sound of marbles falling into the box]
Dialogue: 0,0:08:46.86,0:08:49.37,Default,,0000,0000,0000,,♪
Dialogue: 0,0:08:49.54,0:08:50.54,Default,,0000,0000,0000,,[clang]
Dialogue: 0,0:09:04.29,0:09:07.89,Default,,0000,0000,0000,,♪
Dialogue: 0,0:09:30.01,0:09:31.68,Default,,0000,0000,0000,,[marble clatters on the floor]
Dialogue: 0,0:09:33.28,0:09:36.51,Default,,0000,0000,0000,,[marble clatters down the stairs]
Dialogue: 0,0:09:48.23,0:09:50.62,Default,,0000,0000,0000,,At this moment I felt like a vampire.
Dialogue: 0,0:09:50.62,0:09:55.70,Default,,0000,0000,0000,,It was like the marbles showed me\Nthe way out of my studio and into the Sun.
Dialogue: 0,0:09:55.63,0:09:57.94,Default,,0000,0000,0000,,I spent a little time inside my Studios.
Dialogue: 0,0:09:57.94,0:10:01.16,Default,,0000,0000,0000,,So I was, so happy strolling around with the camera
Dialogue: 0,0:10:01.16,0:10:04.77,Default,,0000,0000,0000,,[frogs croaking]\NListen to this frogs outside my house
Dialogue: 0,0:10:05.18,0:10:08.88,Default,,0000,0000,0000,,[croaking continues]
Dialogue: 0,0:10:09.42,0:10:11.53,Default,,0000,0000,0000,,[wind noises]
Dialogue: 0,0:10:13.70,0:10:16.92,Default,,0000,0000,0000,,This is 24/7 [chuckles]\NThis goes on!
Dialogue: 0,0:10:16.92,0:10:20.89,Default,,0000,0000,0000,,This is my apricot tree.\NI found the first apricot the other day.
Dialogue: 0,0:10:20.89,0:10:21.68,Default,,0000,0000,0000,,You see it?
Dialogue: 0,0:10:21.68,0:10:22.79,Default,,0000,0000,0000,,You see it?\NThere!
Dialogue: 0,0:10:23.55,0:10:24.79,Default,,0000,0000,0000,,It's an apricot!
Dialogue: 0,0:10:25.62,0:10:27.11,Default,,0000,0000,0000,,So cool!
Dialogue: 0,0:10:28.14,0:10:31.50,Default,,0000,0000,0000,,There's a huge rose here on the front of the house
Dialogue: 0,0:10:45.20,0:10:47.60,Default,,0000,0000,0000,,I got my 'fepsultier' under the rose
Dialogue: 0,0:10:48.46,0:10:50.33,Default,,0000,0000,0000,,He's having a good time there.
Dialogue: 0,0:10:50.33,0:10:52.71,Default,,0000,0000,0000,,It's like Ferdinand.
Dialogue: 0,0:10:52.71,0:10:55.48,Default,,0000,0000,0000,,Yes! It's smelling the flowers
Dialogue: 0,0:10:55.48,0:10:56.89,Default,,0000,0000,0000,,[chuckles]
Dialogue: 0,0:10:57.64,0:11:00.69,Default,,0000,0000,0000,,BBC Planet Earth, (has) got nothing on me.
Dialogue: 0,0:11:06.14,0:11:11.25,Default,,0000,0000,0000,,Okay! So, thank you so much for watching\Nand believing in the Marble Machine X.
Dialogue: 0,0:11:11.25,0:11:12.65,Default,,0000,0000,0000,,See you next week!
Dialogue: 0,0:11:13.52,0:11:17.22,Default,,0000,0000,0000,,[Marble Machine X winding down sound]\N[frogs croaking]
Dialogue: 0,0:11:19.44,0:11:25.38,Default,,0000,0000,0000,,// Subtitled by Wintergatan Writers. Join our team on discord. //