[Script Info]
Title: 
[Events]
Format: Layer, Start, End, Style, Name, MarginL, MarginR, MarginV, Effect, Text
Dialogue: 0,0:00:01.46,0:00:05.61,Default,,0000,0000,0000,,>> Chapter 21, specifying
Dialogue: 0,0:00:05.61,0:00:08.74,Default,,0000,0000,0000,,three-dimensional\Ncoordinates.
Dialogue: 0,0:00:08.74,0:00:11.52,Default,,0000,0000,0000,,In this chapter,\Nwe're going to work
Dialogue: 0,0:00:11.52,0:00:15.21,Default,,0000,0000,0000,,on understanding\N3D drawing,
Dialogue: 0,0:00:15.21,0:00:18.68,Default,,0000,0000,0000,,working with the\N3D coordinates,
Dialogue: 0,0:00:18.68,0:00:22.24,Default,,0000,0000,0000,,and working with the\Nelevation and thickness,
Dialogue: 0,0:00:22.24,0:00:23.91,Default,,0000,0000,0000,,creating a custom
Dialogue: 0,0:00:23.91,0:00:28.72,Default,,0000,0000,0000,,User Coordinate System\Nfor 3D drawing.
Dialogue: 0,0:00:29.60,0:00:32.76,Default,,0000,0000,0000,,Before, we were\Nworking always in
Dialogue: 0,0:00:32.76,0:00:36.28,Default,,0000,0000,0000,,the x and y space or axis.
Dialogue: 0,0:00:36.28,0:00:40.84,Default,,0000,0000,0000,,In this chapter, we\Nare adding z-axis.
Dialogue: 0,0:00:44.24,0:00:48.30,Default,,0000,0000,0000,,In this Figure 21.1,\Nas you can see,
Dialogue: 0,0:00:48.30,0:00:49.74,Default,,0000,0000,0000,,on the left image is
Dialogue: 0,0:00:49.74,0:00:53.42,Default,,0000,0000,0000,,a top view or floor\Nplan of a building,
Dialogue: 0,0:00:53.42,0:00:56.70,Default,,0000,0000,0000,,and the right view\Nis a perspective.
Dialogue: 0,0:00:58.70,0:01:03.01,Default,,0000,0000,0000,,Working in three-dimensional\Nenvironment.
Dialogue: 0,0:01:04.74,0:01:10.14,Default,,0000,0000,0000,,So either you can open\Na template file as
Dialogue: 0,0:01:10.14,0:01:12.40,Default,,0000,0000,0000,,acad3D or you can change
Dialogue: 0,0:01:12.40,0:01:17.09,Default,,0000,0000,0000,,the workspace to\Nthree-dimensional space.
Dialogue: 0,0:01:18.68,0:01:21.81,Default,,0000,0000,0000,,Here on AutoCAD,
Dialogue: 0,0:01:21.81,0:01:23.85,Default,,0000,0000,0000,,there is a workspace
Dialogue: 0,0:01:23.85,0:01:28.16,Default,,0000,0000,0000,,and next to the\NQuick Access view.
Dialogue: 0,0:01:28.16,0:01:30.08,Default,,0000,0000,0000,,Drafting annotation,
Dialogue: 0,0:01:30.08,0:01:32.36,Default,,0000,0000,0000,,it means two-dimensional\Ndrawing.
Dialogue: 0,0:01:32.36,0:01:35.74,Default,,0000,0000,0000,,Switch that one\Nto 3D modeling.
Dialogue: 0,0:01:35.74,0:01:38.81,Default,,0000,0000,0000,,You can see the panels
Dialogue: 0,0:01:38.81,0:01:40.97,Default,,0000,0000,0000,,and ribbons are changing.
Dialogue: 0,0:01:40.97,0:01:43.35,Default,,0000,0000,0000,,If you don't have\Na workspace,
Dialogue: 0,0:01:43.35,0:01:46.40,Default,,0000,0000,0000,,you can find this\Ndrop-down arrow
Dialogue: 0,0:01:46.40,0:01:49.49,Default,,0000,0000,0000,,and look for\Nthe workspace.
Dialogue: 0,0:01:50.03,0:01:54.34,Default,,0000,0000,0000,,We are now in the\N3D modeling space.
Dialogue: 0,0:01:54.77,0:01:59.43,Default,,0000,0000,0000,,Under view, you can
Dialogue: 0,0:01:59.43,0:02:05.62,Default,,0000,0000,0000,,see viewport toolbars
Dialogue: 0,0:02:05.81,0:02:09.86,Default,,0000,0000,0000,,and unsaved view,
Dialogue: 0,0:02:09.86,0:02:13.38,Default,,0000,0000,0000,,or you can see in\Nthe isometric views;
Dialogue: 0,0:02:13.38,0:02:15.81,Default,,0000,0000,0000,,Southwest isometric,
Dialogue: 0,0:02:15.81,0:02:19.38,Default,,0000,0000,0000,,Southeast isometric,\NNortheast isometric.
Dialogue: 0,0:02:19.38,0:02:22.13,Default,,0000,0000,0000,,Click on that one. We are
Dialogue: 0,0:02:22.13,0:02:24.70,Default,,0000,0000,0000,,on the Northeast\Nisometric.
Dialogue: 0,0:02:24.70,0:02:26.80,Default,,0000,0000,0000,,And even the view cube,
Dialogue: 0,0:02:26.80,0:02:31.07,Default,,0000,0000,0000,,you have a chance to\Nswitch the views.
Dialogue: 0,0:02:33.46,0:02:36.04,Default,,0000,0000,0000,,In the 3D modeling,
Dialogue: 0,0:02:36.04,0:02:38.48,Default,,0000,0000,0000,,I'm going back\Nto Home tab,
Dialogue: 0,0:02:38.48,0:02:43.19,Default,,0000,0000,0000,,we have three types\Nof modeling; solid,
Dialogue: 0,0:02:43.19,0:02:46.71,Default,,0000,0000,0000,,surface, mesh,
Dialogue: 0,0:02:47.48,0:02:50.10,Default,,0000,0000,0000,,and we are planning\Nto work on the
Dialogue: 0,0:02:50.10,0:02:54.36,Default,,0000,0000,0000,,solid and mesh\Nin this class.
Dialogue: 0,0:02:55.09,0:02:59.94,Default,,0000,0000,0000,,Under Home, we have
Dialogue: 0,0:02:59.94,0:03:05.76,Default,,0000,0000,0000,,x and y and\Nadditional z-axis.
Dialogue: 0,0:03:05.76,0:03:10.63,Default,,0000,0000,0000,,Now we are on the World\NCoordinate System.
Dialogue: 0,0:03:12.77,0:03:15.36,Default,,0000,0000,0000,,For example, if I draw
Dialogue: 0,0:03:15.36,0:03:21.54,Default,,0000,0000,0000,,a box and change
Dialogue: 0,0:03:21.54,0:03:24.31,Default,,0000,0000,0000,,the visual style\Nconceptual,
Dialogue: 0,0:03:25.94,0:03:29.08,Default,,0000,0000,0000,,I'm going to change\Nthe coordinate.
Dialogue: 0,0:03:29.08,0:03:30.48,Default,,0000,0000,0000,,Here under the tab, there
Dialogue: 0,0:03:30.48,0:03:32.64,Default,,0000,0000,0000,,is a coordinates panel.
Dialogue: 0,0:03:32.64,0:03:37.80,Default,,0000,0000,0000,,If I change the\Ncoordinates to the front,
Dialogue: 0,0:03:37.80,0:03:39.92,Default,,0000,0000,0000,,can you see the\Ndifference on
Dialogue: 0,0:03:39.92,0:03:48.06,Default,,0000,0000,0000,,the direction\Nof the x-axis,
Dialogue: 0,0:03:48.06,0:03:50.42,Default,,0000,0000,0000,,and y-axis, and z-axis?
Dialogue: 0,0:03:50.42,0:03:51.84,Default,,0000,0000,0000,,So that's how we
Dialogue: 0,0:03:51.84,0:03:53.48,Default,,0000,0000,0000,,are changing the\Ncoordinates,
Dialogue: 0,0:03:53.48,0:03:57.11,Default,,0000,0000,0000,,and it's called User\NCoordinate System.
Dialogue: 0,0:03:57.11,0:04:04.92,Default,,0000,0000,0000,,Switching to the right,\Nunder Coordinates,
Dialogue: 0,0:04:04.92,0:04:08.66,Default,,0000,0000,0000,,I'm going to change the\Ncoordinates to top.
Dialogue: 0,0:04:08.66,0:04:10.48,Default,,0000,0000,0000,,So top is like
Dialogue: 0,0:04:10.48,0:04:12.94,Default,,0000,0000,0000,,a World Coordinate\NSystem for us now.
Dialogue: 0,0:04:12.94,0:04:15.68,Default,,0000,0000,0000,,So the origin is\Nchanging every
Dialogue: 0,0:04:15.68,0:04:19.22,Default,,0000,0000,0000,,time. One more time.
Dialogue: 0,0:04:19.22,0:04:22.63,Default,,0000,0000,0000,,Front, you can\Nsee the x, and y,
Dialogue: 0,0:04:22.63,0:04:28.57,Default,,0000,0000,0000,,and z-axis,\Nright, x and y,
Dialogue: 0,0:04:28.57,0:04:32.29,Default,,0000,0000,0000,,and z-axis, and left,
Dialogue: 0,0:04:32.29,0:04:42.22,Default,,0000,0000,0000,,top,
Dialogue: 0,0:04:42.22,0:04:43.94,Default,,0000,0000,0000,,and the bottom.
Dialogue: 0,0:04:45.35,0:04:48.16,Default,,0000,0000,0000,,So why do we need access
Dialogue: 0,0:04:48.16,0:04:50.54,Default,,0000,0000,0000,,to change the coordinates?
Dialogue: 0,0:04:50.54,0:04:52.52,Default,,0000,0000,0000,,The reason that\Nwe need to change
Dialogue: 0,0:04:52.52,0:04:56.14,Default,,0000,0000,0000,,the coordinate\Nis, for example,
Dialogue: 0,0:04:56.14,0:04:57.96,Default,,0000,0000,0000,,if I'm planning to draw
Dialogue: 0,0:04:57.96,0:05:00.82,Default,,0000,0000,0000,,something on\Nthe left view,
Dialogue: 0,0:05:00.95,0:05:05.98,Default,,0000,0000,0000,,from the Home tab\Ndrawing panel circle.
Dialogue: 0,0:05:05.98,0:05:09.30,Default,,0000,0000,0000,,When I move my mouse,\Non the left view,
Dialogue: 0,0:05:09.30,0:05:12.48,Default,,0000,0000,0000,,I have a chance to\Ndraw that circle
Dialogue: 0,0:05:12.48,0:05:17.51,Default,,0000,0000,0000,,exactly on the left view.
Dialogue: 0,0:05:21.83,0:05:26.36,Default,,0000,0000,0000,,I'm going back to World\NCoordinate System.
Dialogue: 0,0:05:26.36,0:05:30.12,Default,,0000,0000,0000,,I'm changing the\Nvisual style
Dialogue: 0,0:05:30.12,0:05:36.30,Default,,0000,0000,0000,,to 2D wireframe and
Dialogue: 0,0:05:36.30,0:05:42.27,Default,,0000,0000,0000,,now we are going\Nto start working
Dialogue: 0,0:05:42.27,0:05:52.66,Default,,0000,0000,0000,,on Exercise\NAB21-A DWG file.
Dialogue: 0,0:05:53.15,0:05:57.34,Default,,0000,0000,0000,,So from Canvas,\Nplease download
Dialogue: 0,0:05:57.34,0:06:03.07,Default,,0000,0000,0000,,a File AB21-A and\Nopen that file.
Dialogue: 0,0:06:04.97,0:06:09.16,Default,,0000,0000,0000,,And also from the book,
Dialogue: 0,0:06:12.08,0:06:15.36,Default,,0000,0000,0000,,you can see the\Nsteps for drawing
Dialogue: 0,0:06:15.36,0:06:16.84,Default,,0000,0000,0000,,the
Dialogue: 0,0:06:30.44,0:06:32.40,Default,,0000,0000,0000,,3D coordinates,
Dialogue: 0,0:06:32.40,0:06:34.52,Default,,0000,0000,0000,,using 3D coordinates.
Dialogue: 0,0:06:34.52,0:06:37.96,Default,,0000,0000,0000,,So I'm going to\Nfollow the steps
Dialogue: 0,0:06:37.96,0:06:42.37,Default,,0000,0000,0000,,from this book\Non Page 664.
Dialogue: 0,0:06:44.54,0:06:49.21,Default,,0000,0000,0000,,On desktop, I\Ncreated ENT 135.
Dialogue: 0,0:06:49.61,0:06:55.76,Default,,0000,0000,0000,,So here I have my DWG\NBible book drawing.
Dialogue: 0,0:06:55.76,0:06:59.46,Default,,0000,0000,0000,,There's AB21-A here.
Dialogue: 0,0:06:59.46,0:07:03.00,Default,,0000,0000,0000,,I'm going to open\NFile AB21-A.
Dialogue: 0,0:07:03.00,0:07:05.64,Default,,0000,0000,0000,,It's an empty file.
Dialogue: 0,0:07:05.64,0:07:09.93,Default,,0000,0000,0000,,So I'm going to\Nsave as this file
Dialogue: 0,0:07:09.93,0:07:13.06,Default,,0000,0000,0000,,back to Assignment
Dialogue: 0,0:07:18.56,0:07:21.12,Default,,0000,0000,0000,,21A-01.
Dialogue: 0,0:07:21.12,0:07:23.42,Default,,0000,0000,0000,,Steps using 3D\Ncoordinates.
Dialogue: 0,0:07:23.42,0:07:30.13,Default,,0000,0000,0000,,Open File AB21-A DWG\Nfrom the Canvas site.
Dialogue: 0,0:07:30.13,0:07:32.07,Default,,0000,0000,0000,,This exercise, assume that
Dialogue: 0,0:07:32.07,0:07:33.73,Default,,0000,0000,0000,,you have a dynamic\Ninput turn
Dialogue: 0,0:07:33.73,0:07:37.53,Default,,0000,0000,0000,,on set to the default\Nof relative coordinate.
Dialogue: 0,0:07:37.53,0:07:39.44,Default,,0000,0000,0000,,The drawing used
Dialogue: 0,0:07:39.44,0:07:42.98,Default,,0000,0000,0000,,a two-dimensional\Nenvironment.
Dialogue: 0,0:07:45.56,0:07:48.28,Default,,0000,0000,0000,,It looks like\Nthree-dimension environment.
Dialogue: 0,0:07:48.28,0:07:50.38,Default,,0000,0000,0000,,So I'm going back\Nto two-dimension.
Dialogue: 0,0:07:50.38,0:07:58.37,Default,,0000,0000,0000,,Save it as AB21-1 in\Nyour assignment folder.
Dialogue: 0,0:07:58.37,0:08:01.62,Default,,0000,0000,0000,,Choose a home type,
Dialogue: 0,0:08:01.62,0:08:04.86,Default,,0000,0000,0000,,drawing panel rectangular,
Dialogue: 0,0:08:04.86,0:08:07.88,Default,,0000,0000,0000,,and create a rectangle.
Dialogue: 0,0:08:08.76,0:08:11.66,Default,,0000,0000,0000,,Start a rectangle\Ncomment at
Dialogue: 0,0:08:11.66,0:08:16.87,Default,,0000,0000,0000,,the specifying first\Ncorner rectangle.
Dialogue: 0,0:08:18.68,0:08:26.70,Default,,0000,0000,0000,,Type 0,
Dialogue: 0,0:08:26.70,0:08:30.51,Default,,0000,0000,0000,,0, 19.
Dialogue: 0,0:08:30.51,0:08:32.17,Default,,0000,0000,0000,,Press "Enter".
Dialogue: 0,0:08:32.42,0:08:36.93,Default,,0000,0000,0000,,At the specified\Nother corner type
Dialogue: 0,0:08:36.93,0:08:42.70,Default,,0000,0000,0000,,39, 15, "Enter".
Dialogue: 0,0:08:42.70,0:08:47.31,Default,,0000,0000,0000,,This creates a\Nrectangle 39 units
Dialogue: 0,0:08:47.31,0:08:49.19,Default,,0000,0000,0000,,by 15 units wide.
Dialogue: 0,0:08:49.19,0:08:53.44,Default,,0000,0000,0000,,That is 19 units above\Nthe x and y-plane.
Dialogue: 0,0:08:53.44,0:08:55.20,Default,,0000,0000,0000,,Notice that you omit
Dialogue: 0,0:08:55.20,0:08:58.77,Default,,0000,0000,0000,,the z-coordinate for\Nthe second corner.
Dialogue: 0,0:08:58.77,0:09:00.39,Default,,0000,0000,0000,,Choose a home tab,
Dialogue: 0,0:09:00.39,0:09:04.48,Default,,0000,0000,0000,,modify panel,\Ncopy to start.
Dialogue: 0,0:09:08.03,0:09:11.29,Default,,0000,0000,0000,,We're going to copy
Dialogue: 0,0:09:12.62,0:09:15.40,Default,,0000,0000,0000,,the rectangle two units
Dialogue: 0,0:09:15.40,0:09:17.26,Default,,0000,0000,0000,,above the original\Nrectangle.
Dialogue: 0,0:09:17.26,0:09:19.86,Default,,0000,0000,0000,,So select the rectangle,
Dialogue: 0,0:09:21.20,0:09:24.00,Default,,0000,0000,0000,,select object,\Npress "Enter",
Dialogue: 0,0:09:24.00,0:09:30.16,Default,,0000,0000,0000,,and type 0,
Dialogue: 0,0:09:30.16,0:09:33.70,Default,,0000,0000,0000,,0, 2, "Enter".
Dialogue: 0,0:09:37.25,0:09:41.32,Default,,0000,0000,0000,,Press "Enter" to get\Nout of the command.
Dialogue: 0,0:09:44.63,0:09:48.53,Default,,0000,0000,0000,,You have two\Nrectangles but
Dialogue: 0,0:09:48.53,0:09:49.76,Default,,0000,0000,0000,,because you are\Nlooking from
Dialogue: 0,0:09:49.76,0:09:52.58,Default,,0000,0000,0000,,top, you see only one.
Dialogue: 0,0:09:57.47,0:10:00.20,Default,,0000,0000,0000,,So we are going to
Dialogue: 0,0:10:00.20,0:10:02.12,Default,,0000,0000,0000,,Home tab view panel
Dialogue: 0,0:10:02.12,0:10:05.26,Default,,0000,0000,0000,,3D navigation\Ndropdown list
Dialogue: 0,0:10:12.11,0:10:18.88,Default,,0000,0000,0000,,and choose Southeast\Nisometric.
Dialogue: 0,0:10:24.29,0:10:29.50,Default,,0000,0000,0000,,Now you can see\Ntwo rectangles.
Dialogue: 0,0:10:30.68,0:10:33.69,Default,,0000,0000,0000,,If object snap is\Nnot turned on,
Dialogue: 0,0:10:33.69,0:10:35.49,Default,,0000,0000,0000,,click on the\N"Object Snap".
Dialogue: 0,0:10:35.49,0:10:37.96,Default,,0000,0000,0000,,Remember object snap?
Dialogue: 0,0:10:37.96,0:10:40.94,Default,,0000,0000,0000,,Set the running object\Nsnap to endpoint.
Dialogue: 0,0:10:40.94,0:10:43.52,Default,,0000,0000,0000,,I'm going to turn off\Nthe rest of them.
Dialogue: 0,0:10:43.52,0:10:50.30,Default,,0000,0000,0000,,Start the line command\Nand check on here.
Dialogue: 0,0:10:50.30,0:10:55.66,Default,,0000,0000,0000,,We should be following\NFigure 21.6.
Dialogue: 0,0:10:55.66,0:10:58.89,Default,,0000,0000,0000,,I'm in the Step 7,
Dialogue: 0,0:11:00.44,0:11:04.09,Default,,0000,0000,0000,,going back to our\Nfigure drawing.
Dialogue: 0,0:11:05.57,0:11:09.69,Default,,0000,0000,0000,,Start Home tab line.
Dialogue: 0,0:11:09.69,0:11:12.88,Default,,0000,0000,0000,,From Point 1,
Dialogue: 0,0:11:14.03,0:11:17.92,Default,,0000,0000,0000,,pick endpoint at Point 1.
Dialogue: 0,0:11:23.60,0:11:28.66,Default,,0000,0000,0000,,So second point or\Nspecifying next point,
Dialogue: 0,0:11:28.66,0:11:33.60,Default,,0000,0000,0000,,type pound, 0,
Dialogue: 0,0:11:33.60,0:11:37.36,Default,,0000,0000,0000,,0, 0, "Enter".
Dialogue: 0,0:11:37.49,0:11:41.18,Default,,0000,0000,0000,,Specifying next point, 1,
Dialogue: 0,0:11:41.18,0:11:44.18,Default,,0000,0000,0000,,0, 0, "Enter".
Dialogue: 0,0:11:44.18,0:11:47.40,Default,,0000,0000,0000,,Specifying next point, 0,
Dialogue: 0,0:11:47.40,0:11:52.09,Default,,0000,0000,0000,,0, 21, "Enter"\Nand "Enter".
Dialogue: 0,0:11:53.00,0:11:56.83,Default,,0000,0000,0000,,We need to copy\Nthese three lines.
Dialogue: 0,0:11:58.52,0:12:01.39,Default,,0000,0000,0000,,Press "Enter".
Dialogue: 0,0:12:06.71,0:12:10.27,Default,,0000,0000,0000,,From the endpoint,
Dialogue: 0,0:12:10.70,0:12:16.72,Default,,0000,0000,0000,,type 38, 0, 0, "Enter".
Dialogue: 0,0:12:17.93,0:12:23.32,Default,,0000,0000,0000,,Means 38 units\Nto the right.
Dialogue: 0,0:12:23.32,0:12:29.04,Default,,0000,0000,0000,,I can just copy\Nthose two legs all
Dialogue: 0,0:12:29.04,0:12:34.34,Default,,0000,0000,0000,,the way to the extraction,
Dialogue: 0,0:12:34.34,0:12:37.90,Default,,0000,0000,0000,,to the y direction to\Nback of the table.
Dialogue: 0,0:12:37.90,0:12:45.00,Default,,0000,0000,0000,,So copy. Either I
Dialogue: 0,0:12:45.00,0:12:47.32,Default,,0000,0000,0000,,can just copy\Nfrom here to here
Dialogue: 0,0:12:47.32,0:12:51.54,Default,,0000,0000,0000,,or I could just add 15 for
Dialogue: 0,0:12:51.54,0:12:53.94,Default,,0000,0000,0000,,the coordinates\Nand it would
Dialogue: 0,0:12:53.94,0:12:58.00,Default,,0000,0000,0000,,copy the legs all\Nthe way to the back.
Dialogue: 0,0:13:00.20,0:13:02.86,Default,,0000,0000,0000,,Actually, it's\Na piano bench.
Dialogue: 0,0:13:02.86,0:13:06.83,Default,,0000,0000,0000,,To draw an open cover\Nfor the piano bench,
Dialogue: 0,0:13:06.83,0:13:11.16,Default,,0000,0000,0000,,we need to start a\Nline again, line.
Dialogue: 0,0:13:11.96,0:13:16.42,Default,,0000,0000,0000,,Start at the\Nendpoint at Point 2.
Dialogue: 0,0:13:16.42,0:13:19.33,Default,,0000,0000,0000,,Here is a Point\N2 from the book.
Dialogue: 0,0:13:19.40,0:13:22.16,Default,,0000,0000,0000,,And specifying next point,
Dialogue: 0,0:13:22.16,0:13:27.87,Default,,0000,0000,0000,,type 15 with the angle of
Dialogue: 0,0:13:27.87,0:13:31.94,Default,,0000,0000,0000,,90 and the angle
Dialogue: 0,0:13:31.94,0:13:39.31,Default,,0000,0000,0000,,of 45. Press "Enter".
Dialogue: 0,0:13:47.63,0:13:51.57,Default,,0000,0000,0000,,And turn on the\NOrtho mode or F8.
Dialogue: 0,0:13:51.57,0:13:53.76,Default,,0000,0000,0000,,Make sure you go\Nstraight all the
Dialogue: 0,0:13:53.76,0:13:59.10,Default,,0000,0000,0000,,way and type 39,
Dialogue: 0,0:13:59.10,0:14:01.78,Default,,0000,0000,0000,,is the same way of\Ndrawing a line.
Dialogue: 0,0:14:01.78,0:14:03.90,Default,,0000,0000,0000,,And also, you\Ncan all the way
Dialogue: 0,0:14:03.90,0:14:06.06,Default,,0000,0000,0000,,down and close this door
Dialogue: 0,0:14:06.06,0:14:10.12,Default,,0000,0000,0000,,by finishing with\Nthe endpoint
Dialogue: 0,0:14:10.12,0:14:14.54,Default,,0000,0000,0000,,of the left corner or\NPoint 3 from the book.
Dialogue: 0,0:14:14.54,0:14:20.20,Default,,0000,0000,0000,,The last line is going\Nto be the bracing.
Dialogue: 0,0:14:24.20,0:14:27.93,Default,,0000,0000,0000,,This line. So you're
Dialogue: 0,0:14:27.93,0:14:31.14,Default,,0000,0000,0000,,going to have to\Nstart the line.
Dialogue: 0,0:14:31.14,0:14:33.19,Default,,0000,0000,0000,,Starting point is\Ngoing to be Number
Dialogue: 0,0:14:33.19,0:14:37.14,Default,,0000,0000,0000,,4 to Number 3,
Dialogue: 0,0:14:37.14,0:14:39.69,Default,,0000,0000,0000,,or you can use coordinates
Dialogue: 0,0:14:39.69,0:14:43.21,Default,,0000,0000,0000,,of 15 with the\Nangle of 20,
Dialogue: 0,0:14:45.80,0:14:49.48,Default,,0000,0000,0000,,2 as a z-axis.
Dialogue: 0,0:14:49.48,0:14:53.96,Default,,0000,0000,0000,,Press "Enter". As you see,
Dialogue: 0,0:14:53.96,0:14:57.42,Default,,0000,0000,0000,,our drawing is in the\Nthree-dimensional view.
Dialogue: 0,0:14:57.42,0:15:00.28,Default,,0000,0000,0000,,Don't forget to\Nsave your file.