-
Not Synced
Training and Certification of Assistant
Traffic Control Managers
-
Not Synced
a training video presented by the
Nebraska Department of Roads.
-
Not Synced
Section One: Introduction to Work Zone
Traffic Control
-
Not Synced
Proper maintenance of temporary traffic control
devices in work zones is vitally important.
-
Not Synced
Careful drivers rely on uniform devices
and applications to guide them safely and
-
Not Synced
efficiently through construction areas.
-
Not Synced
Work zone devices that are installed
correctly and are well maintained will
-
Not Synced
also protect the lives of workers and
reduce exposure to legal liability for the
-
Not Synced
state, counties, cities, and contractors.
-
Not Synced
Regular inspections of work zone traffic
control devices are imperative.
-
Not Synced
The purpose of this video and the written
materials which accompany it,
-
Not Synced
is to provide training and certification
of Assistant Traffic Control Managers
-
Not Synced
who will inspect work zone traffic control
devices.
-
Not Synced
This training includes the following
topics: national traffic control standards,
-
Not Synced
driver characteristics and the need for
traffic control device uniformity,
-
Not Synced
fundamentals of work zone traffic control,
proper maintenance of the following
-
Not Synced
traffic control devices: signs,
channelizing devices, lighting devices,
-
Not Synced
and pavement markings, importance of good
communication between highway workers
-
Not Synced
and managers, and legal issues associated
with work zone traffic control.
-
Not Synced
First, let's look at national traffic control
standards.
-
Not Synced
All temporary traffic control devices such
as those used in work zones must conform
-
Not Synced
to the Manual on Uniform Traffic Control
Devices, known as the MUTCD.
-
Not Synced
The MUTCD provides national standards and
guidelines applicable to all streets and
-
Not Synced
highways open to public travel.
-
Not Synced
There are five requirements traffic
control devices should meet:
-
Not Synced
Devices should: fulfill a need, command
attention, convey a clear, simple meaning,
-
Not Synced
command respect of the motorist, and
give adequate time for proper response.
-
Not Synced
In order to meet the needs requirements,
five basic considerations should be kept
-
Not Synced
in mind:
-
Not Synced
Design: the size, color, shape,
reflectorization and message of the device.
-
Not Synced
Placement: devices should be placed where
they will get the attention of drivers.
-
Not Synced
They must be positioned properly in
relation to the situation in which they apply.
-
Not Synced
Location is also very important in regard
to device placement. Although there are no
-
Not Synced
specific distance requirements, a device
must be able to give a driver traveling
-
Not Synced
at normal speed enough time to make the
proper response.
-
Not Synced
Operation: devices must be placed in a
uniform and consistent manner to allow
-
Not Synced
careful drivers to respond in the proper
fashion.
-
Not Synced
Maintenance: devices must be maintained
to ensure legibility and visibility.
-
Not Synced
They must also be kept clean and in good
working order.
-
Not Synced
And finally, uniformity. Uniform devices
enhance driver recognition, promote
-
Not Synced
consistent interpretation, reduce cost by
reducing device inventory, earn motorist
-
Not Synced
respect and enforce expectations.
-
Not Synced
Excessive use of devices should be avoided
to reduce potentially dangerous conditions.
-
Not Synced
Driver characteristics and the need for
traffic control device uniformity
-
Not Synced
Traffic control devices are designed
with the driver in mind.
-
Not Synced
Under normal conditions, motorists are
required to process large amounts
-
Not Synced
of complex information and make decisions
based upon their interpretation
-
Not Synced
of that data. When drivers enter a work
zone, additional demands are made on
-
Not Synced
drivers' attention. Work zone conditions
will almost always be more difficult for
-
Not Synced
the motorist than normal conditions.
Instead of having a clear, unobstructed
-
Not Synced
roadway, motorists must face closed lanes,
workers in close proximity, reduced speeds,
-
Not Synced
unfamiliar pavement conditions, other
vehicles in the work zone and so on.
-
Not Synced
Work zones are also dynamic. As drivers
become accustomed to one phase, work
-
Not Synced
progresses and traffic control is altered.
-
Not Synced
And, many times, drivers are performing
at a level below their ability. They are
-
Not Synced
often tired, ill, distracted, or impaired
other ways.
-
Not Synced
That's why there is little margin for
error when installing and
-
Not Synced
maintaining work zone traffic control
devices.
-
Not Synced
Signage, cones, drums, barriers, and all
such devices must get a driver's attention
-
Not Synced
and give very clear direction to assist
attentive drivers as they safely navigate
-
Not Synced
the work zone environment.
-
Not Synced
Of course, some drivers will fail to
safely navigate the work zone regardless
-
Not Synced
of measures taken to direct and assist
them.
-
Not Synced
Fundamentals of work zone traffic control
-
Not Synced
The MUTCD calls for fundamental principles
of work zone traffic control.
-
Not Synced
These principles are:
-
Not Synced
Make safety a high-priority component
in any work zone project.
-
Not Synced
Devices should be comparable to those used
in normal highway situations.
-
Not Synced
Every project should have and follow a
traffic control plan.
-
Not Synced
Avoid traffic slow downs, keep reductions
to a minimum and avoid frequent and abrupt
-
Not Synced
lane changes, work to minimize duration of
work activities and perform as much work
-
Not Synced
as possible during off-peak times.
-
Not Synced
Give drivers clear and positive guidance.
-
Not Synced
Motorists should have adequate warning
of channelization.
-
Not Synced
Perform routine inspections. Work zones
should be inspected regularly in all
-
Not Synced
traffic and weather conditions. This
includes night-time inspections.
-
Not Synced
Traffic control should be modified, as
necessary, and devices removed immediately
-
Not Synced
when no longer needed. And, lastly, pay
constant attention to roadside safety.
-
Not Synced
Keep the roadside area clear of equipment,
vehicles, and materials whenever possible,
-
Not Synced
thus minimizing the opportunity for off the
road vehicle impacts.
-
Not Synced
Elements of a work zone traffic control plan:
-
Not Synced
Every work zone project has a specifically
designed traffic control plan.
-
Not Synced
The traffic control manager, employed by
the project contractor, is responsible for
-
Not Synced
correct installation and maintenance of
all traffic control devices as called for
-
Not Synced
in the plan. Assistant traffic control
managers must be familiar with the plan
-
Not Synced
in order to properly inspect all traffic
control devices in the work zone.
-
Not Synced
Every work zone consists of four main
areas. The advance warning area:
-
Not Synced
The purpose of the Advance Warning Area
is to tell drivers what to expect as they
-
Not Synced
approach the work zone. This is usually
accomplished with signage.
-
Not Synced
The Transition Area:
-
Not Synced
Redirection or channelization
of traffic occurs in the Transition Area.
-
Not Synced
Cones, drums, panels or other channelizing
devices are typically placed to form
-
Not Synced
a taper, which guides traffic through
the new route.
-
Not Synced
The Activity Area
-
Not Synced
This is the area in which the actual
construction is taking place. The Activity
-
Not Synced
Area is composed of the workspace which is
reserved for workers, equipment and
-
Not Synced
materials, the traffic space, and an
optional buffer space to separate traffic
-
Not Synced
flow from the work area.
-
Not Synced
The Termination Area