Qui vediamo l'inserimento -- l'importazione di un file OPML in Bloglines.
Allora, andiamo in Bloglines: www.bloglines.com e facciamo il login.
Vabbé, avevo già inserito le credenziali, ero già loggato, e quindi sono dentro.
L'ho vuotato per fare l'esempio, e assumo di avere già disponibile il file OPML, scaricato sul computer.
Aggiungo contenuto.
Allora, qui, due parole:
per aggiungere un feed, dice: "Inserisci un indirizzo di feed"
e abbiamo visto in un altro video che questo -- l'indirizzo dei feed è una cosa,
l'URL, l'indirizzo del blog, è un'altra.
Se si mette l'indirizzo del feed, lui lo aggiunge direttamente.
Se si mette solo l'indirizzo del blog, URL del blog,
allora lui andrà a cercare se ci sono -- per vedere se ci sono indirizzi di feed dentro, e li proporrà.
Ma inserire un file OPML è una cosa diversa.
All'inizio, alcuni avevano confuso la faccenda ed avevano messo qui l'indirizzo del file OPML
dove io lo rendo disponibile in DropBox, ecco, con un link nel mio blog.
No: l'OPML va importato, non va inserito niente qui.
Importa.
Sfoglia.
L'avevo messo sul Desktop -- sì, eccolo qui: questo --
e importa. OK.
Dice che ha importato 343 feeds. Benissimo.
Naturalmente, qui ci vuol un po' di pazienza perché ci mette un po' di tempo a caricarli.
Uno può anche mettersi a fare un'altra cosa.
Ecco che stanno arrivando.
Bene: tutto qui.
Hier sehen wir die Aufnahme--in Bloglines eine OPML-Datei importieren.
Dann gehen wir zu Bloglines: www.bloglines.com und Login.
Aber ich hatte bereits geschrieben, meine Anmeldeinformationen, ich war bereits eingeloggt und so bin ich.
Ich abgelassen, um das Beispiel zu tun, und ich nehme an, Sie haben bereits die OPML-Datei auf Ihren Computer heruntergeladen.
Ich hinzufügen Inhalte.
Ja, hier zwei Wörter:
um einen Feed hinzuzufügen sagt: "Einen Feed hinzufügen"
und in ein anderes video haben wir gesehen, dass dies--die feed-Adresse ist eine Sache,
die URL-Adresse des Blogs, ist eine andere.
Wenn Sie die feed-Adresse setzen, fügt er es direkt.
Wenn Sie nur die Adresse des Blogs, Blog-URL einfügen,
Er wird dann suchen, wenn es gibt--zu sehen, ob es Adressen von RSS-Feeds im Inneren gibt, und schlagen sie.
Aber geben Sie eine OPML-Datei ist eine andere Sache.
Zu Beginn, einige hatten die Sache verwirrt und hatte setzen Sie hier die Adresse der OPML-Datei
wo stehe ich in DropBox, hier mit einem Link in meinem Blog zur Verfügung.
Nr.: die OPML importiert, nicht alles hier gepostet.
Angelegenheit.
Durchsuchen.
Ich hatte auf dem Desktop--ja, hier ist es:-
und Importe. Okay.
Er sagt, er hat 343 Feeds importiert. Fein.
Hier ist natürlich ein wenig Geduld, denn es eine Weile zum Laden dauert.
Man kann auch eine andere Sache zu tun.
Hier, die kommen.
Gut: das alles hier.
Here we see the inclusion--importing an OPML file in Bloglines.
Then, we go to Bloglines: www.bloglines.com and login.
But, I had already posted my credentials, I was already logged in, and so I'm in.
I drained to do the example, and I assume that you have already available the OPML file, downloaded to your computer.
I add content.
So, here, two words:
to add a feed, says: "Add a feed"
and we have seen in another video that this--the feed address is one thing,
the URL address of the blog, is another.
If you put the feed address, he adds it directly.
If you put only the address of the blog, blog URL,
then he will look for if there are--to see if there are addresses of feeds inside, and propose them.
But enter an OPML file is a different thing.
At the beginning, some had confused the matter and had put here the address of the OPML file
where I am available in DropBox, here, with a link in my blog.
No: the OPML is imported, not posted anything here.
Matter.
Browse.
I had put on the Desktop--Yes, here it is: this--
and imports. Ok.
He says he has 343 imported feeds. Fine.
Of course, here is a bit of patience because it takes a while to load.
One can also get to do another thing.
Here's that are coming.
Good: everything here.
Ici, nous voyons l'inclusion--importation d'un fichier OPML dans Bloglines.
Ensuite, nous allons à Bloglines : www.bloglines.com et vous connecter.
Mais, j'avais déjà posté mes informations d'identification, j'étais déjà connecté, et je suis donc en.
J'ai vidé pour faire l'exemple, et je suppose que vous avez déjà disponible le fichier OPML, téléchargé sur votre ordinateur.
J'ai ajouter du contenu.
Donc, ici, deux mots :
pour ajouter un fil, dit: « Ajouter un fil »
et nous l'avons vu dans une autre vidéo que cela--l'adresse du flux est une chose,
l'adresse URL du blog, est une autre.
Si vous mettez l'adresse du flux, il ajoute directement.
Si vous mettez seulement l'adresse du blog, blog URL,
puis il va chercher s'il y a--pour voir s'il y a des adresses de flux à l'intérieur et les proposer.
Mais entrez un OPML fichier est quelque chose de différent.
Au début, certains avaient confondu la question et avaient mis ici l'adresse du fichier OPML
où je suis disponible dans DropBox, ici, avec un lien dans mon blog.
Non : l'OPML est importé, pas rien posté ici.
Question.
Parcourir.
J'avais mis sur le bureau--Oui, c'est ici:-
et les importations. Bien.
Il dit qu'il a 343 aliments importés. Amende.
Bien sûr, voici un peu de patience car il faut un certain temps à charger.
On peut aussi obtenir de faire autre chose.
C'est là que sont à venir.
Bon : tout l'ici.